Nikon D3100 New Firmware

The firmware version is 1.01 – you should always first check which version is installed, to avoid unnecessary operation. The new firmware solves or reduces occasional problems occurring in different areas, the dominant color, autofocus and viewing the images.

The FOSE is the most important area Autofocus: Live View shooting mode, face tracking, in some cases the car “lost”the subject chosen, the problem has been eliminated.

Two corrections relate to the dominant color, a magenta dominated that appeared at the bottom of still images taken at high sensitivity after taking in live view or video taken for a long time: the phenomenon is reduced. The same appeared magenta setting up the white balance for images captured in RAW Image Overlay function (superposition of two images taken in sequence) or with Capture NX2 NX2 View, and here the problem is resolved.

Also fixed problems viewing images in playback: retouched pictures in the room, displayed in calendar mode, were ordered by the date of correction and not a recovery. And in some cases were not correctly displayed images taken in live view and continuous shooting mode.

Finally, interventions aimed at reducing the noise, when noise reduction mode is active, the reduction occurs at all ISO settings, of course, especially at higher sensitivity. The surgery is performed immediately shutter speed slower than 8 seconds for images taken at high sensitivity and high temperature inside the camera. The operation is signaled by an indicator in the viewfinder, and prevents you from continuing to shoot. The time required is the exposure time used for the shot. The explanation of the Noise Reduction function in the menu has been adapted to these changes. Finally revised the error message shown when you can not activate Live View.